nokia router

view fram source

var wlan_config = {
	5:{"Flag":"0",
	X_CT_COM_SSIDHide:0,
	SSIDAdvertisementEnabled:1,
	X_CT_COM_RFBAND:1,
	X_CT_COM_ChannelWidth:2,
	X_CT_COM_RetryTimeout:20,
	X_ASB_COM_Powerlevel:100,
	X_CT_COM_PowerValue:1585,
	X_ASB_COM_BannedNumbers:'',
	TransmitPower:100,
	X_CT_COM_GuardInterval:1,
	RadioEnabled:1,
	X_CT_COM_WPSKeyWord:128,
	Enable:1,
	X_ASB_COM_MuMimoEnable:1,
	X_ASB_COM_TxBfEnable:1,
	X_ASB_COM_DFSReentryEnable:0,
	SSID:'Bum_Airtel_5G',
	BSSID:'54:37:bb:d0:8b:6d',
	SSIDIsolate:0,
	WPSEnable:0,
	WPSMode:'pbc',
	MACAddressControlEnabled:0,
	radiusServerIp:'122.160.130.202',
	radiusPort:'1812',
	radiusPassword:'nTZiRPSiQelcJkuq165kMQ==',
	X_ASB_COM_radiusServerIp2:'122.160.130.203',
	X_ASB_COM_radiusPort2:'1812',
	X_ASB_COM_radiusPassword2:'nTZiRPSiQelcJkuq165kMQ==',
	AutoChannelEnable:1,
	Channel:52,
	ChannelsInUse:'52',

 The router/GPON has a telnet interface. Unfortunately, the console does not provide a facility to configure the router,

Code:

Hello, Welcome to User CLI (version 0.95).
user> show version
Zebra 0.95 (mips-linux).
Copyright 1996-2004, Kunihiro Ishiguro.


user> en

user#
  configure   Configuration from vty interface
  disable     Turn off privileged mode command
  exit        Exit current mode and down to previous mode
  help        Description of the interactive help system
  list        Print command list
  logout      logout and byebye.
  nslookup    Query nameserver for the specified host
  ntp         Date and time in UTC that of the CPE when it sync with SNTP server.
  ping        Send echo messages
  shell       start shell, need to input the dynamic password
  show        Show information from vty interface
  tftp        Transfer syslog,omci,voice log to tftp server.
  traceroute  trace route about a host

user# con

user(config)#
  end      End current mode and down to previous mode
exit     Exit current mode and down to previous mode
  help     Description of the interactive help system
  list     Print command list
rsyslog  Configure rsyslog file size and beacon log level.
  syslog   Configure syslog file number and file size.
user(config)# list
  end
  exit
  help
  list
  rsyslog rgw_filesize <1-5> rgw_loglevel <0-7> beacon_filesize <1-5> beacon_loglevel <0-7> [remote_ip A.B.C.D] [persistent FLAG]
  syslog filenum <1-5> filesize <1-5> [persistent FLAG]

Internally it is running the same software as G140WC,

Code:

user(show)# buildinfo
ONT_TYPE=g140wc
PON_MODE=GPON
SOFTWAREVERSION=DGA.B98p01
PRODUCTCLASS=g140wc
RELEASE=0.0.0
BUILDSTAMP=
BUILDDATE=20191204_1030
COPYRIGHT=ASB
WHOBUILD=buildmgr
IMAGEVERSION=3FE47150DGAB98
VOIP=sip
CONFIG_VOIP_SW=
LATEST_REV=55716
REPO=sw
SIGN=n
CVP_REVISION=3d58ea3594f91a6b91a25ed4c0017b754f08d4b3

There seems to be and old config in the router,

Code:

user(show)# swversion
Software Image #0:
version = 3FE47150DGAB98
is active = Yes
is valid=Yes
is committed =Yes
Software Image #1:
version = 3FE47150DGAB44
is active = No
is valid=Yes
is committed =No
Boot version =U-Boot Dec-31-2016--12:00:00