managed server

Navigate to “Device Manager’ from control panel  By Default, you can only see the current in use device under the “Network adapters” node Try click on “View”->”Show hidden device” OK, now you can see all of the historical devices, deleted all of the “Local Area Connection”, “Local Area Connection 2”, “Local Area Connection 3”, hit “Scan hardware change” button Your “Local Area Connection” will back 

If you are connected to vpn but no page is opening or saying dns probe finished no internet than just change the dns of the vpn in tap adapter to open dns or google dns 8.8.8.8 or 8.8.4.4 now try to open any page it will surely open

To make your open port config vpn just delete nobind and write lport 9201 -replace 9201 with your open port in open vpn config

open vpn Is World Best  VPN client To Access All Blocked Websites And Get Best Security And Speed ---------------------------------------------------------------------------------- All Most Information About Hotspot Shield VPN Config  And How To Use For Best Way Config Location C:\Program Files (x86)\HxVPN-HSS\config Note -UDP VPN Not Work With Http And Https Proxy -You Can Remove 'lport xx' Line From Config Network Find Auto Open Port [Indian Network lport Is 1194] -After Remove 'lport xx' You Need To Change 'bind' Line To 'nobind'  - You Can Change lport XX To Your Open Port [Like 53 ,52 ,443] -If You Have Any Network Open Port So Need To Change Only 'lport XX' [Like 53 ,52 ,443]  -Do Not Change Remote Ip Port Because Now remote Port Is Fix by Hotspot Shield -You Can Use Your Name And Information In Config With ' # ' And ' echo ' To Start Q- What Is Open Port ? Ans- Open Port Is A Server W...

Error the following black or color ink has run out To disable detecting of ink level in ciss (continue ink system) ink tank system in canon printers press stop or reset button in the printer for 5 seconds this will disable the ink level detecting in ciss ink tank system and the printing will continue without any problem through continue ink system

go to the property of that tap driver only tick ipv4 and ipv6 and click ok

Unable to connect via OpenVPN protocol Cause: wrong media status in TAP adapters advanced settings Solution: Go to the properties of the TAP adapter in your network control panel. Right-click it, select "Properties". Click "Configure". Go to the "Advanced" tab, select "Media Status". Set it to "Always Connected" to apllication controlled

if firewall is not monitring apps aceesing to internet then go to properties of that network and check near the comodo